Welcome to our website
Copyright© 2019 Dongguan Changlian New Material Technology Co., ltd 粤ICP备2023093978号 Powered by www.300.cn
Direct spray paint ink
Chemical composition: polyurethane modified acrylate copolymer, pigment, surfactant
|Changlian Technology direct-injection paint ink is suitable for piezoelectric nozzles, with good fluency, no corrosive solvents, and long service life. The ink coating has good resistance to friction and washing fastness. The product can be used for digital inkjet printing of cotton and cotton blended fabrics, environmentally friendly, pollution-free, and color reduction.
|Appearance (visual inspection)
|CMYK four-color liquid
|Solid content (GB/T 11175-2002)
|pH value (GB/T 11175-2002)
|Average particle size
|Scope of application
|CLT1788 is a widely applicable paint ink, which can be used for:
|●EPSON fifth-generation print head / 5113 print head / 4720 print head / XP600 and other piezoelectric print heads
|●Digital printing of fabrics such as pure cotton or cotton-containing textiles
●Digital printing of transfer film, artificial leather and other fabrics
Dark fabric: digital white glue 803-1 is printed 3 times, the last time does not flash dry, inkjet under wet, after the ink is dry, press at 150°C for 15 seconds (twice) or cure at 130°C for 2 minutes.
White fabric: digital processing liquid 2299-1 is printed once, and then inkjet is flashed. After the ink dries, press at 150°C for 15 seconds (twice) or cure at 140°C for 2 minutes.
Remarks: According to the customer's needs, add additives or increase the bottoming, covering and other processes, and the board must be confirmed first.
|CLT1788 contains technically unavoidable trace amounts of volatile organic matter. Based on our experience and other information we have, it is harmless to human health when used for the intended purpose and in compliance with correct industrial regulations.
|The general precautions for storage and transportation of chemicals and the measures specified in the local sanitary conditions must be followed. The workplace must be well ventilated. The operator should take measures to protect the skin and wear protective glasses.
One year in a closed and cool environment; it is recommended to use it within two months after opening.
CLT1788 must avoid contact with iron, copper, zinc and other metals. The packaging must be airtight to avoid getting close to heat sources and freezing.
|The packaging should be stored in a ventilated and cool place. CLT1788 can be stored at 10-30℃ for 12 months. The environment during transportation cannot be lower than 5°C, otherwise, bad phenomena will occur.