长联科技
产品中心
小图客户留言
小图下载中心
小图联系我们
小图公司地图
Your present location:Products >> Special glue series >> 366 High foaming paste/388 Normal foaming Paste
  • Products name: 366 High foaming paste/388 Normal foaming Paste
  • products number: 366 High foaming paste/388 Norma
  • Weight: 0.00g
  • Units of measurement:
  • Last time: 2014-01-06
  • Views : 118

This paste is suitable for blends fabric printing to avoid too high elasticity fabric printing

 366 is for high foaming, 388 is for normal foaming.

 

Appearance:yellow paste

Components:poly acrylic resin / foaming powder.

PH value:5.5-7.5

Property:Soft handfeel, good fastness and elasticity. Easy to operate.

Feature:even foaming effect, better fluff handfeel, easy to operate, smooth surface.

Formulation:

High foaming 366: 20-30% white paste/Clear paste (based on foaming and color requirement to adjust the formulation accordingly)

Media foaming 388: 30-40% white paste/Clear paste (based on foaming and color requirement to adjust the formulation accordingly)

Printing procedure:Printing--Naturally dry----curing at 130 centigrade for 2 minutes or Heat-press at 130 centigrade for 10-15 seconds, after completely dry to conduct washing fastness at 40 centigrade for 2 hours.

Eco-status:eco-friendly.

Remarks:

1.    Make sure completely dry before curing, otherwise the uneven foaming and no foaming will happen

2.    Foaming process should be complete once.

3.    366/388 is for low temp foaming, the curing temp should not over 130 centigrade otherwise the dent will be happen.

4.    Be sure completely dry before washing test

5.  In high moisture or low temp weather, please extend the drying time to make sure printing completely dry.

Above information for reference only. The trial test is a must before mass production, otherwise any problem caused we will not take the responsibility.

Key words :