The emergence of glue and its wide application in water slurry, because of its very good coverage, it can also print any light color on dark clothes, and it has a certain gloss and three-dimensional effect, making the garment look more high-end So it is quickly popularized, and it is used on almost every printed T. But because it has a certain hardness, it is not suitable for large-area solid patterns. It is best to print large-area patterns with water paste, and then embellish some glue, which can solve the problem of large-area glue hard and highlight the pattern. Another way is to steal a large area of ​​solid patterns to make a bad effect, but it is always a bit hard to wear, so it is better to combine water and glue to solve the problem of large-area printing. . There are glossy and matte surfaces, soft, thin, environmentally friendly and can be stretched.

 

Because the glue is relatively dense and viscous, the number of general printing colors is limited. In rotary screen printing and flat screen printing, the number of color sets should generally not exceed 5 sets, otherwise it is easy to cause uneven printing surface and uneven color (because (The color printed on the front is not completely dry when printing the color on the back)

 

In the piece printing, the glue printing method is different from the fabric printing. You can wait for the previously printed color to dry slightly before printing a set of colors, so you can print more colors and maintain the gloss and gloss of the printed part. The color does not change.

 

The glue printing process uses a special chemical gel and dyes to be highly seamlessly mixed. The dye is firmly attached to the fabric through the medium of the gel. The glue printing process overcomes the limitations of water-based printing. Its characteristic is to adapt to printing of various color depths and materials. It can be printed on blended fabrics of cotton, linen, viscose, polyester, nylon, polypropylene, chlorine and various fibers, as well as on leather, artificial leather and other materials. For printing, it can be used for fluorescent printing, inkjet printing, burnout printing, electrostatic flocking printing and other printing processes. The biggest advantage of the glue printing process is that it is widely used, beautiful in color, and high in reduction. However, its printing process is more complicated than the water paste printing process, and the cost is relatively high.