长联科技
新闻中心
小图联系我们
小图客户留言
小图公司地图
小图下载中心
Your present location:News >> Printing knowledge >> What is mortar printing

What is mortar printing

Date:1/17/2014 02:24:11 PM
Image

Abstract:

The emergence and widespread application of glue after water slurry, because of its coverage is very good, so the dark clothes can also be printed on any of the light, and there is a certain gloss and three-dimensional, make clothing look more upscale , so it spread rapidly, almost every piece of printed T will be used on it. But because it has a certain hardness, it is not suitable for large-scale field pattern, a large area of ​​the pattern is best to water slurry seal, then dotted some glue, so that both can solve the problem of a large area of ​​hard mortar, but also can highlight patterns layering; Another method is to take time off large areas of the field pattern, made bad effect, but always wear a little hard, so the best water, mortar combined to solve the problem of large-area printing better . There are glossy and matte, with a soft, thin, green, etc., can be stretched.

Because of relatively dense mortar, sticky, So the general restrictions on the number of colors printed in peace rotary screen printing screen printing, the color is generally not more than 5 sets of copy number, or likely to cause printing surface uneven, uneven color (because in the back of the printed color front printed colors do not completely dry)

Pieces are printed, glue fabric printing with different printing methods, front color, such as a little dry after printing a set of colors, so you can print more color and keep the gloss and color printing part of the same.

Glue printing of special chemical gel is applied seamlessly mixed with dyes highly. Dye through the gel medium effects, firmly attached to the fabric, glue printing technology to overcome the limitations of slurry printing. Characterized by adapting various color depth and quality of printing, it is available in cotton, linen, rayon, polyester, nylon, polypropylene, an-VDC copolymer fibers blended fabric on the printing, and also can be printed on materials such as leather, imitation leather, with its fluorescent printing, inkjet printing, burnt-out printing, flocking printing and other printing process. Glue largest advantage is widely used in printing process, colors, restore and high, but its production process is relatively complicated slurry printing process, the cost is relatively high.

 

TypeInfo: Printing knowledge

Keywords for the information: